Manufacturing space and machinery

MACHINE SHOP SPACE (2 x 20 m x 90 m) 3600 m2
- free height 8,5 m
- bridge cranes (4 / 3 pcs.) 35/25 tons
- lifting height 6,4 m
- doorways width 9,8 m x height 6,1 m

SANDBLASTING SPACE (10 m x 30 m) 300 m2
- free height 7 m
- manual sandblasting machinery
- shotblasting line (in installation) opening 2,9 x 2,5 m

PAINTSHOP (15 m x 60 m) 900 m2
- free height 7 m
- bridge cranes, 2 pcs. 4 tons
- lifting height 5,8 m
- doorways width 10 m x height 5,8 m
- hot-air heating/heat exchangers
- manual painting machinery

LIFTING AND MOVING EQUIPMENT
- transfer car, lifting height 2 m 25 tons
- transfer car, telescope 6 tons

MACHINES AND DEVICES
- 2 x NC-flame cutting machine 2 m x 6 m / 4 m x 12 m
- sheet metal cutter (hydraulic) pl = 16, w = 3000 mm
- sheet metal cutter (hydraulic) pl = 12, w = 6000 mm
- edging press (hydraulic) 400 tons, w = 4500 mm
- NC-edging press 320 tons, w = 4000 mm
- band saw 2 pcs. ±45o, Ø 450 mm
- radial drill 2 pcs. MK 5, 1755/1600 mm, Ø 50 mm
- radial drill MK 6, 3000/2000 mm, Ø 60 mm
- upright drill/multi-spindle boring machine
- horizontal boring machine (manual) Ø 150, 4600/1800/1800/1500 mm
- horizontal boring machine (manual) Ø 250, 4500/1500/500/500 mm
- horizontal boring machine (manual) Ø 200, 2000/500/500/300 mm
- horizontal boring machine (NC) Ø 90, 2600/1000/1000 mm
- centre lathe (manual) Ø 350/630 mm, w = 2800 mm
- turret lathe/gun drill Ø 600, w = 1500 mm
- turret lathe Ø 1000 mm
- centre lathe with measuring equipment Ø 200/400 x 1500 m
- general cutter 720/500/220 mm
- standard manual welding machinery
- straight seam welding machine, 2 burners w = 15000 mm
- compressed air plasm pl = 8 mm, 50 A
- mangle 16 mm x 3500 mm
- hydraulic press 260 tons
- vertical milling machine w = 600 mm
- 6+3-axis Motoman-welding robot, rotating device 5 tons, floor line of 15 metres, inductive seam detection and seam tracking
- IGM-welding station, two 6-axis robots, wall rail of 10 metres, two rotating devices, inductive seam detection and seam tracking